Thermoplastic alloys & blends
OSAALLOY
A hybrid approach to effective performance.
PC/ABS · PC/PBT · PBT/PET · PA/ABS · PA6/66
OSAALLOY blends two or more polymers (PC/ABS, PC/PBT, PBT/PET, PA/ABS, PA6/66) by physical compounding or chemical grafting. You get properties no single resin delivers, often at a lower material cost.
Download leaflet (PDF)Why engineers choose it
- Enhanced mechanical strength and rigidity
- Higher impact resistance
- Tuned flow for thin walls
- Cost-optimised versus single high-end resins
Available with
- Glass fibre
- Carbon fibre
- Mineral / talc
- Flame retardant
- UV stabilised
- Heat stabilised
- Custom colour
Published grades
OSAALLOY · 8 grades
Relative ratings from our product leaflet. All grades available with FR, UV, glass fibre or other specified properties on request.
| Grade | Polymer | Surface finish | Dimensional stability | Low warpage | Melt flow | Mould release | Stiffness | Impact strength | Low-temp ductility | Heat resistance | Chemical resistance | Abrasion resistance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7030 HBKUnfilled, lubricated, UV treated | PA/ABS Unfilled |
|||||||||||
| CP 1180Impact modified | PC/PBT Unfilled |
|||||||||||
| CP 6080Impact modified, UV stabilised, excellent flow | PC/ABS Unfilled |
|||||||||||
| 5812Excellent flow, impact modified | PBT/PET Unfilled |
|||||||||||
| 504 GFGlass-fibre reinforced | PBT/PET 20% GF |
|||||||||||
| 5015 MRImpact modified, excellent flow | PBT/PET 15% MR |
|||||||||||
| 8070High flow, impact modified | PA6/PA66 Unfilled |
|||||||||||
| 30520% glass-fibre reinforced | ABS/PBT 20% GF |
ExcellentGoodMedium
Where it goes
Mirror housings, air vents, charging inlets, wheel trims, appliance and office-equipment housings, medical device parts.
Not in the list?
Most of what we ship is customised. Give us the requirement and we will formulate a grade for it.